Huepar 4x360° Cross Line Laser with Laser Enhancement Glasses, 4D Self-Leveling Tiling Floor Laser Tool - 2x360° Horizontal & 2x360°Vertical Laser Lines, Magnetic Pivoting Base&Green Glasses Included

S04CG-L 4 x 360° Green Beam Floor Laser Level Specifications: Laser Class: Class 2 Number of Lines: Two 360° horizontal floor laser lines & Two 360° Vertical laser lines Laser Wavelength: 505-520nm Horizontal/Vertical Accuracy: ±1/9 inch at 33Ft. Leveling/Compensation Range: ±3.5° Working Distance (Line): 130Ft (100 LUX), 200Ft. with Huepar Receiver LR-5RG/LR-6RG Power Source: Li-ion battery & 4×AA (LR6) batteries Operating Time: with Lithium Battery: 5 hours with all laser beams on; with AA Batteries: 0.5 hours with all laser beams on IP Rating: IP54 dust-proof, waterproof and shockproof, reliable and tough Mount Size: 1/4"-20 WARNING: Do not point the laser beam directly into the eyes. The device is a laser class 2 laser product according to IEC / EN60825-1 / 2014. It is allowed to use the device without any further safety precautions. The eye protection is usually secured by aversion reactions and blink reflex. Specification of Huepar GL01G Laser Enhancement Glasses: Applicable Laser Class: CLASS 2 Size: Approx 15 x 5.5 x 5.5cm Arm adjustable range: 9 - 11.4 cm / 3.6 - 4.5 inch Note: The glasses GL01G can only for better visibility, not for protection. Package Contents 1 x 4D Green Tiling Laser Level S04CG-L 1 x Rechargeable Li-ion Battery 1 x Power Adapter& Type-C cord 4 x AA (LR6) Batteries & 1 x AA Battery Holder 1 x Magnetic Bracket 1 x Lifting Base 1 x Steel Sheet 1 x Laser Target Plate 1 x Lase Level User Manual 1 x Portable Bag 1 x Huepar GL01G Green Glasses 1 x Black Velvet Box

• 4 X 360° WITH TOP & FLOOR LINE LASER: This laser tool provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation. With the lifting base, the 360° floor laser can raise from the surface to project over and travel past uneven surfaces or obstructions between 1" and 3.54" height. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout.
• TRIPLE POWER METHODS&TYPE-C CHARGING PORT: This 360 laser tool adopted large capacity Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc.
• MULTIFUNCTIONAL LASER TOOL: The four 360° laser planes can be selected individually by separate H and V button on the keypad. With smart pendulum, the laser tool self levels and indicates out-of-level condition while pendulum unlocked. The line laser will beep when out of self-leveling range ±3.5°. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver LR-6RG/LR-5RG.
• IMPROVED LASER VISIBILITY - When the power of the laser tool is weak and the laser beam is dark, wearing the glasses GL01G can increase the visibility of the green laser line or the green laser point to some extent. (Please note these laser glasses can only for better visibility, not for protection.)
• ADJUSTABLE FRAME - FOR WEARERS OF GLASSES - The length of the arms is adjustable for 4 modes by about 2 cm (9 - 11.4 cm). The side and nose pieces fit perfectly without the slipping by adjusting the length of the arm. You don't need to take off myopia or farsighted glasses, you can directly wear the GL01G glasses outside.